Juniper SRX320 Quick Start Guide

Quick Start Guide
SRX320 Services Gateway
IN THIS GUIDE
SRX320 Services Gateway Overview | 1
SRX320 Front Panel and Rear Panel | 2
Factory-Default Settings | 3
Install the Device in a Rack | 4
Connect the Grounding Cable (Optional) | 7
Power On the Device | 8
Configure Root Authentication | 9
Plug and Play | 11
Customize the Configuration | 11
Next Steps | 12
Reference | 12
SRX320 Services Gateway Overview
The SRX320 Services Gateway consolidates security, routing, switching, and WAN interfaces for small distributed
enterprises. With advanced threat mitigation capabilities, the services gateway provides cost-effective and secure
connectivity across distributed enterprises.
With a desktop form-factor chassis, the SRX320 Services Gateway has six 1-Gigabit Ethernet ports, two 1-Gigabit Ethernet
SFP ports, 4 GB of DRAM memory, and 8 GB of flash memory. The SRX320 Services Gateway is available with or without
Power over Ethernet (PoE) capability. In the PoE model, the six Ethernet ports are PoE capable.
Package Contents
The SRX320 Services Gateway is shipped with the following parts:

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm