10
RINSING
FILTER
SHUT TAP
Close the steam / hot water draw-off tap (15).
HEATING
READY
5.3 Replacing the filter without display request
Rinsing, cleaning, de-scaling and filter replacement can also be
started without the corresponding request of your IMPRESSA
E80/85, if necessary, directly from the maintenance menu.
Press the maintenance key (9) until
RINSING is displayed
Turn the Rotary Switch (1) until
FILTER is displayed
Press the Rotary Switch (1)
Now the program “Replacing the filter” is activated. Now, pro-
ceed as described in Chapter 5.2 as from
REPLACE OPEN TAP
6. IMPRESSA E80/85 rinsing upon display request
When the IMPRESSA E80/85 was switched off and has
cooled down in the meantime, a rinsing operation is started
when the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatically.
Switch on the IMPRESSA E80/85 using the ON/OFF key
(8).
HEATING
PRESS
RINSE
Press the maintenance key (9).
RINSE
READY
6.1 IMPRESSA E80/85 rinsing without display request
Press the maintenance key (9) until
RINSE is displayed
Press the Rotary Switch (1)
RINSE
7. Adjusting the water quantity for coffee
The indicated value in ML/OZ is a reference value and may
deviate from the actual value
If you press the draw-off key for 2 cups (4) the water
quantity is doubled automatically.
You can change/stop the water quantity during the draw-off
operation, too. Turn the Rotary Switch (1) until the required
ML value is displayed.
You can adjust the water quantity in steps of 5 ML using the
Rotary Switch (1).
READY
Turn the Rotary Switch (1) until the required water quantity is
displayed.
For example, 120 ML
To Next Page
Loading...
