EasyManuals Logo

Jura IMPRESSA E85 User Manual

Jura IMPRESSA E85
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
Open the bean tank cover (13) and remove the aroma preser-
vation cover (14).
Remove any dirt or foreign matter from the bean tank.
Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend
a fine grinding degree for bright roasts (the smaller the dots,
the finer the grinding)
a coarse degree for dark roasts (the larger the dots, the
coarser the grinding)
The grinding degree may only be adjusted while the grinding
gear is running.
Open the bean tank cover (13) and remove the aroma preser-
vation cover (14).
To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to
the required position.
2.6 Power switch
Actuate the power switch (22) on your IMPRESSA E80/85
before using the machine for the first time.
We recommend that you switch off your IMPRESSA E80/85
with the power switch (22) if you intend not to use the
machine for longer periods of time (e.g.during holidays)
3. First use
Upon first commissioning or after a service, the system
needs to be filled. The system filling operation works prop-
erly only if NO CLARIS plus filter is inserted. Please do not
insert it before the system is filled and
READY is displayed.
Fill coffee beans in the bean tank (13).
Switch on the IMPRESSA E80/85 using the ON/OFF key (8).
SPRACHE
DEUTSCH
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until the required language is dis-
played.
For example LANGUAGE
ENGLISH
Confirm your selection by pressing the Rotary Switch (1).
FILL
WATER
E

Table of Contents

Other manuals for Jura IMPRESSA E85

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura IMPRESSA E85 and is the answer not in the manual?

Jura IMPRESSA E85 Specifications

General IconGeneral
TypeAutomatic Coffee Machine
Pump Pressure15 bar
Power1450 W
Adjustable Coffee StrengthYes
Adjustable Water AmountYes
ProgrammableYes
Milk FrotherYes
Programmable Coffee StrengthYes
Programmable Water VolumeYes
Pre-Brew Aroma SystemYes
Cleaning and Descaling ReminderYes
Energy Saving ModeYes
ColorBlack
Water Tank Capacity1.9 liters

Related product manuals