You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 22.
DVD Buttons
Your remote control includes illuminated buttons for key features like Channel +/– and
Volume +/–. Press the LIGHT button to turn the illumination on for 4 seconds.
Light
RM-C1253G, RM-C1254G, RM-C1255G only
RM-C1253G only
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 21.
VCR Buttons
Note: The RM-C203 remote controls can only be used with JVC-brand VCRs
Button Functions
46
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 21.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 22.
VCR/DVD Slide Switch
RM-C1253G, RM-C1254G, RM-C1255G only
To Next Page
Loading...
Need help?
General