High Altitude Mode
For setting the high altitude mode to “On” or “Off”.
Set to
“On” when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).
Hide Mode
For reducing the power consumption through suppressing the current supply for the LD block when the [HIDE] button
is pressed to hide the image temporarily.
Setting Description
Off
The illumination supply remains on when the [HIDE] button is pressed to hide the
image.
On
The illumination supply is turned off when the [HIDE] button is pressed to hide the
image.
Factory Reset
For restoring the settings of this unit to the factory default. However, the following settings will not be reset.
0
Gamma data saved in “Gamma” " “Correction Value” " “Import”.
0
Color profile data saved in “Color Profile” " “Custom1 to Custom6”.
Software Update
For performing a software update.
For the latest information on the software, refer to https://www3.jvckenwood.com/english/download/.
License
For displaying the license in use.
81
Adjust/Set
To Next Page
Loading...
Need help?
General
