Gamma/Tone Mapping
This
item adjusts “Gamma/Tone Mapping” according to the preconfigured “Picture Mode” (output value of the projected
video with respect to the video signal input). It is also used to adjust the preconfigured “Gamma/Tone Mapping” setting.
Æ “Adjusting the Output Value of the Projected Image (Gamma/Tone Mapping)” (P. 46)
0
The available “Gamma/Tone Mapping” settings vary according to the “Picture Mode”.
*1 When “Picture Mode” is set to “HDR10+”, the setting is fixed at “HDR(Auto)”.
*2
“Gamma/Tone Mapping” cannot be configured when “Picture Mode” is configured to “Frame Adapt HDR
1”~“Frame Adapt HDR 3”.
Correction Value
For setting the base gamma for the adjustment of “Picture Tone”, “Dark Level” and “Bright Level” when one of the
“Custom 1” to “Custom 3” settings is selected in Gamma/Tone Mapping.
Æ “Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P.
49)
Color Selection
For selecting the color for adjusting “Picture Tone”, “Dark Level” and “Bright Level”.
Æ “Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P. 49)
Picture Tone
Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.
Æ “Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P.
49)
Æ “Performing Tone Mapping Manually” (P. 44)
Dark Level / Bright Level
You can adjust the image quality to produce a sharp contrast in the brightness.
Æ “Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P.
49)
Æ “Performing Tone Mapping Manually” (P. 44)
Theater Optimizer
This feature automatically configures the overall brightness level during tone mapping according to the screen size and
state of the projector.
Æ “Using the “Theater Optimizer”” (P.
41)
To use, configure the details of the screen in use in “Screen Setting”, followed by pressing “Set”.
*1 This option does not appear in the menu when “Content Type” is configured to “SDR”.
*2 This can be configured only when “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”.
MEMO
Besides displaying the “Screen Setting” menu using “Installation”"“Screen Setting”, you can also press the “Screen
Setting” button in the “Theater Optimizer” menu to display it.
CAUTION
Pressing
“Set” in the “Theater Optimizer” menu automatically applies the details of the screen and state of the projector
in the auto settings of “Theater Optimizer”.
If “Set” is not pressed in the “Theater Optimizer” menu, the settings are applied after the next restart of the unit or change
of the “Installation Mode”.
62
Adjust/Set
To Next Page
Loading...
Need help?
General
