When “Picture Mode” is set to “HDR10+”
Setting Description
High
Displays the tone map when the overall brightness is configured to the high level.
This is suited for large-sized screens.
Mid
Displays the tone map when the overall brightness is configured to the medium
level. This is suited for medium-sized screens.
Low
Displays the tone map when the overall brightness is configured to the low level.
This is suited for small-sized screens.
To enjoy HDR10+ content when the Picture Mode is “HDR10+”, the following installation conditions are recommended.
HDR Quantizer: High HDR Quantizer: Mid HDR Quantizer: Low
Screen Size
Diagonal (inch)
Projection
Distance
(m)
Screen Size
Diagonal (inch)
Projection
Distance
(m)
Screen Size
Diagonal (inch)
Projection
Distance
(m)
K
M
115 3.64 97 3.12 89 2.66
L
N
107 3.49 92 3.00 80 2.62
HDR Quantizer: High HDR Quantizer: Mid HDR Quantizer: Low
Screen Size
Diagonal (inch)
Projection
Distance
(inch)
Screen Size
Diagonal (inch)
Projection
Distance
(inch)
Screen Size
Diagonal (inch)
Projection
Distance
(inch)
K
M
115 143 97 123 89 105
L
N
107 137 92 118 80 103
Deep Black
When “Picture Mode” is configured to a setting between “Frame Adapt HDR 1” and “Frame Adapt HDR 3” or
“FILMMAKER MODE”, the tonal range of the shadows is controlled precisely to enhance the overall contrast of the
image.
Setting Description
On Turns on the Deep Black feature for a more realistic expression of darkness.
Off Turns on the Deep Black feature.
Mapping Level
For configuring the base brightness during auto correction when Gamma/Tone Mapping is configured to “HDR(Auto)”.
0
The
auto correction feature of “HDR(Auto)” is configured based on a 100" screen with a gain of 1.0 in total darkness.
0
Adjust it in the positive direction if there is insufficient brightness in the viewing environment, and in the negative
direction if it is too bright.
*1 This option does not appear in the menu when “Content Type” is configured to “SDR”.
*2
This option does not appear in the menu when “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame
Adapt HDR 3”/“HDR10+”/“FILMMAKER MODE”.
*3 When “Picture Mode” is configured to “HLG”, “Mapping Level” is fixed at “0”.
*4 When “Picture Mode” is configured to “HDR10”“User 4 to User 6”, this option is enabled only when “Tone Mapping”
configured to “HDR(Auto)”.
0
Setting range: -5 to 5
64
Adjust/Set
To Next Page
Loading...
Need help?
General
