Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the feet.
Lift the unit and adjust the four feet.
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift
the image upward/downward or to the left/right. Set it to
your preferred position.
Æ “Adjusting the Lens According to the Projection
Position” (P. 23)
90
80
70
60
50
40
30
20
10
0
10 3020 40
Lens movement range
Horizontal lens shift (%)
Vertical lens shift (%)
Lens shift Range
Up to about 80% of the
projected image
Horizontal Position: 0 % (Center)
Vertical Position
Up to about 34% of the
projected image
Vertical Position: 0% (Center)
Horizontal Position
■
■
■
0
The maximum vertical shift varies with the amount of
horizontal shift. Similarly, the maximum horizontal shift
also changes with the amount of vertical shift.
0
The values on the graph are intended as a guide. Use
them for reference during installation.
17
Set up
To Next Page
Loading...
Need help?
General
