0
Digital zoom and image stabilizer are not available after “AUTO REC” is
set.
0
“AUTO REC” cannot be used together with “TIME-LAPSE RECORDING”
. When both are set, priority is given to “TIME-LAPSE RECORDING”.
0
The auto power off and power-saving modes are not available after “AUTO
REC” is set.
Memo :
0
Recording stops when there are no changes for 5 seconds during
recording.
0
Settings of “AUTO REC” are not saved when the power is turned off.
0
Recording may not start when the movements of the subject within the red
frame are too fast or the changes in brightness are too small.
0
Recording may start due to changes in brightness even if there is no
movement within the red frame.
0
While zooming, recording cannot be started.
Remaining Recording Time/Battery Power
You can check the remaining recording time on the SD card as well as the
remaining battery power.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.
1
Press OK/INFO.
.
2
Display the remaining recording time.
.
0
To display the remaining battery power, press OK/INFO again.
0
To exit the display, press MENU.
3
Display the remaining battery power.
.
0
To exit the display, press OK/INFO.
0
Press MENU to return to the remaining recording time display.
0
Remaining battery power will not be displayed when the AC adapter
is connected.
Memo :
0
You can change the video quality from the remaining recording time
display.
Select the video quality with the UP/< and DOWN/> buttons and press
OK.
Recording
33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
