Recording with Decorative Stamps (STAMP)
Records videos with various decorative stamps.
*The following is a screen of the model with Wi-Fi functions.
1
Open the LCD monitor.
.
0
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the recording mode. (You can also use the A/B
button on this unit.)
2
Tap “MENU”.
.
0
The top menu appears.
3
Tap “SPECIAL RECORDING”.
.
4
Tap 1 on the lower right of the screen.
.
5
Tap “STAMP”.
.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Select a stamp.
.
0
Tap K to start selecting a stamp. Tap on the desired stamp to use.
The number indicates the size of the stamp.
.
0
Tap
I
to scroll through the list of stamps.
0
Tap
M
to change the size of stamps.
0
Tap J to return to the previous screen.
7
Tap on the screen to add a stamp.
.
0
Tap J and the “YES” button to delete the stamp.
0
Tap “ON/OFF” to display/hide the stamps.
0
Press the START/STOP button the camera to start recording.
Press again to stop.
0
Tap L to exit “STAMP”.
(To perform operations other than recording, tap L to cancel the
“STAMP” first.)
Memo :
0
Up to 50 stamps may be added.
0
The added stamps are deleted when the stamp mode ends or when power
is turned off.
Recording
42
To Next Page
Loading...
Need help?
General