16
Be sure to confi gure the following 3 settings
before use.
Charging the Battery Pack
1 Set the power/mode switch to OFF.
Slide while pressing down the lock button.
OFF
(CHARGE)
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
BATT.
3 Connect the AC adapter.
•
The access/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
Required charging / recording time
(approx.)
Battery pack Charging time
Recording
time
BN-VF815U
(Provided)
2 hr. 40 min.
1 hr. 25 min.*
1 hr. 25 min.**
BN-VF823U 3 hr. 50 min.
2 hr. 10 min.*
2 hr. 5 min.**
* Using the LCD monitor
** Using the LCD monitor and the LED light
8 To detach the battery pack
Slide and hold BATT. ( step 2), then
remove the battery pack.
8 To check the remaining battery power
See page 18.
NOTES
•
You can also use the camera with just the
AC adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Set Lever
Power/Mode
Switch
Access/Charge
Lamp
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
Necessary Settings before Use
To Next Page
Loading...
Need help?
General