Setting Backlight Compensation
You can correct the image when the subject appears too dark due to
backlight.
1
Press MENU to display the menu.
.
2
Select “MANUAL SETTING” with the ZOOM/SELECT lever and press
OK.
.
.
3
Select “BACKLIGHT COMP.” and press OK.
.
4
Select “ON” and press OK.
.
Setting Metering Area
You can set the brightness of a specified area as the standard.
1
Press MENU to display the menu.
.
2
Select “MANUAL SETTING” with the ZOOM/SELECT lever and press
OK.
.
.
3
Select “METERING AREA/ TYPE” and press OK.
.
4
Select “SPOT” and press OK.
.
.
●
When “SPOT” is selected, select the position of the spot frame by
pressing the +/- buttons.
After selecting, press OK to confirm.
.
Recording
25
To Next Page
Loading...
Need help?
General