28 EN
MasterPage: Left
D.S.C. Recording & Playback
GR-D860
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
Perform steps – in “Normal Playback
Of Images” (墌 27).
Press MENU.
Select “MEMORY CARD”, ( ).
Select “NO. RESET”, press SET. The NO.
RESET screen appears.
Select “EXECUTE”, press SET. The new
folder (such as “101JVCGR”) will be made
and the file name of the next shot starts
from DVC00001.
Note:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The Protect mode helps prevent the accidental
erasure of files.
Perform steps – in “Normal Playback
Of Images” (墌 27).
Press MENU.
Select “MEMORY CARD”, ( ).
Select “PROTECT”, press SET. The
PROTECT menu appears.
● Press whenever you want to return to the
previous menu screen.
To protect the currently displayed file
Select “CURRENT”, press SET.
The PROTECT screen appears.
Press or to select the desired file.
Select “EXECUTE”, press SET.
● To cancel protection, select “RETURN”.
● Repeat steps and for all files you
want to protect.
To protect all files stored in the memory
card
Select “PROT.ALL”, press SET.
The PROTECT screen appears.
Select “EXECUTE”, press SET.
● To cancel protection, select “RETURN”.
Note:
If the “ ” mark appears, the currently displayed
file is protected.
Before doing the following, perform steps
– in “Protecting Files”.
To remove protection from the currently
displayed file
Select “CURRENT”, press SET. The
PROTECT screen appears.
Press or to select the desired file.
Select “EXECUTE”, press SET.
● To cancel selection, select “RETURN”.
● Repeat steps and for all files you want
to remove protection.
To remove protection from all files stored in
the memory card
Select “CANC.ALL”, press SET. The
PROTECT screen appears.
Select “EXECUTE”, press SET.
● To cancel selection, select “RETURN”.
Resetting The File Names
Protecting Files
1
1
1
1
3
3
2
2
3
3
4
4
5
5
1
1
1
1
3
3
2
2
3
3
4
4
5
5
PROTECT
CURRENT
SET
RETURN
PROT. ALL
CANC. ALL
6
6
To Remove Protection
7
7
6
6
7
7
EXECUTE
PROTECT ?
RETURN
PROTECT
5
5
6
6
1
1
4
4
5
5
6
6
7
7
6
6
7
7
5
5
6
6
GR-D820EK_GR-D860EK.book Page 28 Monday, November 19, 2007 10:15 AM