12 EN Getting Started
Open the pad and make grip adjustments.
● Remove any security tags that may be attached
to the velcro.
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw
and lock it in place.
Set the power switch to “OFF”
Open the card cover.
Firmly insert the card with its clipped edge
first.
Close the card cover.
To remove the SD Card
Push the SD Card once.
After the card comes out a little, pull it out.
● Do not touch the terminal on the reverse side of
the label.
Notes:
● Some brands of memory cards are not
compatible with this camcorder. Before
purchasing a memory card, consult its
manufacturer or dealer.
● Before using a new memory card, it is
necessary to format the card
(墌 30).
Grip Adjustment
Tripod Mounting
Velcro
Strip
Bottom of the
camcorder
Using The SD Card
PLEASE FORMAT
Appears when there is a problem with a
memory card and its memory is corrupt, or it
has not been initialised. Intialise the memory
card.
CARD ERROR!
Appears when the camcorder does not
recognise the loaded memory card. Remove
the memory card once and insert it again.
Repeat these procedures until no indication
appears. If the indication still appears, the
memory card is corrupted.
GR-D860
1
1
Card Cover
()
2
2
Memory Card
(optional)
Clipped Edge
3
3
GR-D820EK_GR-D860EK.book Page 12 Monday, November 19, 2007 10:15 AM
To Next Page
Loading...
Need help?
General
