82
EN
LCD Monitor/Viewfinder Indications During Tape Recording Only
1 Displays the selected Fade/Wipe effect.
(Z pg. 40, 41)
2 Appears when in the Squeeze or Cinema mode.
(Z pg. 48)
3 Rotates while the tape is running. (Z pg. 16)
4 Displays the recording mode (SP or LP).
(Z pg. 13)
5 Displays the tape remaining time. (Z pg. 16)
6 • “REC” appears during recording.
• “PAUSE” appears during Record-Standby
mode.
(Z pg. 16)
7 Appears when the wind cut mode is engaged to
cut down on noise created by wind. (Z pg. 48)
8 Appears when the Insert Editing (w) or Insert
Editing Pause (6w) mode is engaged.(Z pg. 64)
9 Displays the sound mode for approx. 5 seconds
after turning on the camcorder. (Z pg. 47)
0 Displays the Time Code. (Z pg. 20, 49)
LCD Monitor/Viewfinder Indications During Memory Card Recording Only
(GR-DVL1020/DVL820/DVL520 only)
1 Displays the image size. (Z pg. 14)
2 Appears and blinks during shooting. (Z pg. 26)
3 • Appears during shooting.
• Blinks when a memory card is not loaded.
(Z pg. 26)
4 Displays the picture quality.
There are 2 modes available: F (Fine) and
S (Standard) (in order of quality). (Z pg. 14)
5 Displays the remaining number of shots that can
be stored. (Z pg. 26)
PL
CER
SOUND B I T
5
21
15:55
0
min
6
w
1
2 4 56
87
3
90
51
1024
1
3 4 52
INDEX
Indications
To Next Page
Loading...
Need help?
General
