JVC GY-HM600U Service Manual

1-24 (No.HC047<Rev.001>)
5.1.8 Hour Meter menu operation
(1) Refer to 5.1.2 to display the Service menu.
(2) Select the [Hour Meter...], and then press the [Set] button
or the [Cross-Shaped] button (right).
(3) The Hour Meter menu is displayed.
Refer to 5.1.4 Advanced Function Menu because the operations
are almost the same.
5.1.9 Others menu operation
(1) Refer to 5.1.2 to display the Service menu.
(2) Select the [Others...], and then press the [Set] button or the
[Cross-Shaped] button (right).
(3) The Others menu is displayed.
Refer to 5.1.4 Advanced Function Menu because the operations
are almost the same.
(Bold is the factory setting.)
5.2 How to update the firmware
NOTE:
• The update should connect both of battery with an AC adap-
tor.
• Remove the USB cable, HDMI cable, component cable and
A/V OUT cable.
• Do not turn OFF the power during the update.
• Update time is about 3 minutes.
5.2.1 Preparation (Copy the firmware to SD/SDHC memory
card)
NOTE:
• Please do not use the SDHC memory card for record.
• Format the SD memory card on the GY-HM600/650 if for-
matting is required.
(1) Download the update file from download site and unzip it to
a PC. (It unzip, when a file is double-clicked.)
(2) Insert the SD/SDHC memory card to the PC and confirm
that no file is in the SD/SDHC memory card. If there are
some files, delete them.
(3) Copy the unzipped update file to the SD/SDHC memory
card. Check that the directory in SD card is as follows.
\\PRIVATE\JVC\GY-HM600 (In case of GY-HM650, \\PRI-
VATE\JVC\GY-HM650)
5.2.2 Update procedure
(1) Check that the power switch is come by OFF. While press-
ing the [FOCUS PUSH AUTO] and [MENU/THUMB (side)]
buttons, turn ON the power.
The version of the present firmware is displayed on VF.
NOTE:
Nothing is displayed on LCD.
VF screen
(2) Insert the SD/SDHC memory card into the card slot B. (Can
not be updated with slot A.)
Item Parameter
Power 000000 Displays the power hour meter.
Reset Resets the power hour meter.
Fan 000000 Displays the fan hour meter.
Reset Resets the fan hour meter.
Slot Eject 000000 Displays the slot A and B eject count.
Reset Resets the slot A and B eject count.
Item Parameter
ALL
Reset
Cancel Standard setting.
Reset Resets all EEP-ROM data to default settings
except adjustment data and hour meter data.
Firmware Update
Current Version: Vxxxx
Please Plug AC and Battery.

JVC GY-HM600U Specifications

General

Brand	JVC
Model	GY-HM600U
Category	Camcorder
Language	English