TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
Memo :
0
When the [TC GENE.] switch is set to “REGEN”,
“REGEN” is displayed and preset is disabled.
(A P73 [Setting Time Code Generator] )
UB Mode
For setting the recording mode of the user’s bit.
0
Date:
Records the date.
0
Time:
Records the time.
0
SW Set:
Operates in the mode selected using the [TC
GENE.] switch.
(A P76 [Setting the User’s Bit] )
[Setting Values: Date, Time, RSW Set]
Memo :
0
If UB Mode is set to “Time”, the user’s bit
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9
Preset
For setting the user’s bit. (Digit by digit)
Display : AB CD EF 01
(A P76 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to “Date” or “Time”, this
item appears as “---” and preset is disabled.
0
When the [TC GENE.] switch is set to “REGEN”,
“REGEN” is displayed and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop,
RDrop]
Memo :
0
Settable only when [Main Menu] B [System] B
[System Frequency] is set to “60/30/24”, and
[Main Menu] B [System] B [Record Set] B
[Record Format] B [WFrame & Bit Rate] is set
to “60p”, “30p”, or “60i”. When the frame rate is
“24p”, “Non Drop” becomes fixed and cannot be
selected.
0
When [Main Menu] B [System] B [System
Frequency] is set to “50/25”, “---” is displayed
and selection is disabled.
(A P133 [ W Frame & Bit Rate ] )
TC/UB Menu
119
Menu Display and Detailed Settings
To Next Page
Loading...
Need help?
General
