LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P121 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P121 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P122 [Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P38 [Adjusting the LCD Monitor and
Viewfinder] )
0
On:
Displays images on the viewfinder at all times.
0
Off:
Turns off the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
Memo :
0
When [Network] is set to “On”, this item is fixed
at “Off” and cannot be selected.
LCD/VF Display
For selecting the angle of view for displaying the
image in the LCD monitor and viewfinder.
0
Wide: Displays images in the full angle of view
of the 16:9 recording format on both the LCD
monitor and viewfinder.
The entire angle of view is displayed, so the
image appears slightly vertically-long.
0
Normal: Displays images in an angle of view
equivalent to the 15:9 format on the LCD
monitor, and an angle of view equivalent to the
16:9 format on the viewfinder.
(The image displayed on the LCD monitor
appears slightly cropped at the left and right
sides compared to the actual recorded image.)
[Setting Values: Wide, RNormal]
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and “Off” to display
in black-and-white.
[Setting Values: ROn, Off]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
When this item is set to “Off”, only the captured
images are displayed in black-and-white. The
display and menu screens are displayed in
color.
VF Contrast
For setting the difference in luminance between the
darkest and brightness areas in the viewfinder
screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Contrast
For setting the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
[Setting Values: Bright, RNormal]
LCD Mirror
For specifying the image display method when
facing the LCD monitor.
Select “Mirror” to display the image after laterally
inverting it. (Mirror display)
(A P38 [Adjusting the LCD Monitor and
Viewfinder] )
[Setting Values: Mirror, RNormal]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
During display of the color bar, the “Mirror”
setting is disabled.
(A P155 [Color Bar Output] )
0
During display of the return video, the “Mirror”
setting is disabled.
(A P172 [Displaying Return Videos from an
External Device A B] )
120
LCD/VF Menu
Menu Display and Detailed Settings
To Next Page
Loading...
Need help?
General
