24
SOUND SETTING
See “Using the TV’s menu” (page 19) for
details of displaying the menu.
STEREO / I • II
When you are viewing a bilingual broadcast
programme, you can choose the sound from
Bilingual I (Sub I) or Bilingual II (Sub II). If
you have poor reception on a stereo
broadcast, you can change from stereo to
mono sound so that you can hear the
broadcast more clearly and easily.
• The sound mode you can choose differs
depending on the TV programme.
• This function does not work in the EXT
modes. And this function does not appear
in the SOUND SETTING menu.
Sound adjustment
You can adjust the sound to your liking.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 : stronger
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 : stronger
BALANCE
You can adjust the volume balance between
the left and right speaker.
2 : turn the left speaker’s volume level up.
3 : turn the right speaker’s volume level up.
HYPER SOUND
Mono sound is converted to simulated stereo
for a more enjoyable audio experience.
ON:
This function is turned on.
OFF:
This function is turned off.
• If the audio is stereo sound, the “3D
CINEMA SOUND function” (see
page 15) is the better choice as it makes
your listening experience more akin to
sitting in an actual cinema.
• When HYPER SOUND is turned on, 3D
CINEMA SOUND turns off, and when
3D CINEMA SOUND is turned on,
HYPER SOUND turns off.
s: Stereo sound
v : mono sound
t : Bilingual I (sub I)
u : Bilingual II (sub II)
D0019-EN
STEREO/
BASS
TREBLE
BALANCE
HYPER SOUND
OFF ON
BACK
SOUND SETTING
TV OK
AV-32&28X37HKE.book Page 24 Thursday, January 23, 2003 11:19 AM
To Next Page
Loading...
Need help?
General