JVC InteriArt AV-28X37HIE User Manual

Troubleshooting
41

 Poor sound
• Have you adjusted BASS or TREBLE
properly? If not, follow the description
“Sound adjustment” on page 24.
• When TV channel reception is poor, it can
be hard to hear stereo or bilingual sound.
In this case, follow the description
“STEREO / I • II” on page 24 to hear the
sound more easily by changing it to a
mono sound.
 If the TV does not respond to the
remote control
• Have the batteries of the remote control
worn out? Follow the description “Putting
the batteries into the remote control” on
page 7 and replace them with new
batteries.
• Have you attempted to use the remote
control from the sides or rear of the TV or
from more than seven metres away from
the TV? Use the remote control in the
front of your TV or from less than seven
metres away.
• When you are viewing a teletext
programme, you cannot operate the
menus. Press the b button to return to
the ordinary TV programme, and then try
operating the menus.
• If the TV will not respond suddenly, press
the main power button on the TV and turn
off the main power. Press the main power
button again to turn on the TV. If the TV
returns to a normal state, it is not a failure.
 Other issues
• When the SLEEP TIMER function
operates, the TV is automatically turned
off. If the TV is turned off suddenly, try to
press the # (standby) button to turn on
the TV once again. If the TV goes back to
normal, there is no problem.
• When the TV is receiving a wide-screen
signal (WSS) or a signal from an external
device affecting the screen size, the
ZOOM mode automatically changes.
When you want to resume the previous
ZOOM mode, press the c button
again.
• If you bring a magnetised equipment such
as a speaker near to your TV, the picture
may be warped or unnatural colours now
appear at the corners of the screen. In this
case, keep the equipment away from your
TV. If speakers cause this to happen, use
magnetic-shielded speakers instead.
• A picture may be tilted due to the earth’s
own magnetic field. If so, use the
“PICTURE TILT (Only for AV-
32X37HKE/AV-32X37HIE)” on page 23
to correct the tilt.
• It takes a short period of time from the
time an operation such as changing
channels is performed until an image is
displayed. This is not a malfunction. This
is the time required for the image to
stabilize before it can be displayed.
• The TV may make a crackling sound due
to a sudden change in temperature. The
picture or sound may be normal. If you
hear crackling sounds frequently while
you are viewing the TV, there may be
other causes. As a precaution, ask your
service technician to inspect it.
• Touching the screen may cause you to
feel a slight electric shock due to its static
electricity. This is unavoidable due to the
construction of the picture tube. It is not a
problem with the TV. You can rest
assured that this static discharge is not
harmful.
AV-32&28X37HKE.book Page 41 Thursday, January 23, 2003 11:19 AM

JVC InteriArt AV-28X37HIE Specifications

General

Brand	JVC
Model	InteriArt AV-28X37HIE
Category	CRT TV
Language	English

Summary

Safety and Precautions

General Safety Warnings

Critical warnings for safe TV operation, covering environmental hazards, ventilation, and handling.

Electrical Safety and Maintenance

Guidelines for safe electrical connections, fuse replacement, and proper maintenance to prevent shock.

Setting Up Your TV

Connecting Equipment

Instructions for connecting aerials, VCRs, and other external devices to the TV.

Initial Setup and Remote Control

Steps for installing remote control batteries and performing the initial TV setup sequence.

Channel Tuning and T-V LINK

Procedures for automatic channel tuning and using T-V LINK for VCR integration.

Advanced Setup Features

Explains Direct Record function and automatic TV power on with VCR playback.

TV and Remote Control Operations

TV Controls and Functions

Identifies and describes the function of physical buttons and basic TV operations.

Remote Control Operations

Explains the usage of core buttons on the remote control for TV operation.

PR List and Volume Adjustment

Guides on using the PR List, adjusting volume, and muting sound.

ZOOM Function

Details on changing screen size using ZOOM modes like AUTO, REGULAR, and PANORAMIC.

3D CINEMA SOUND Function

Explains the 3D CINEMA SOUND feature for enhanced audio experience.

External Device Control

How to operate compatible JVC VCR/DVD players and select external inputs.

Features and Settings

Teletext and Menu Navigation

Comprehensive guide to using Teletext, List Mode, and navigating TV menus for settings.

Picture and Colour Settings

Instructions for adjusting picture settings like mode, contrast, colour, and aspect ratio.

Sound Settings

Guide to adjusting sound settings, stereo modes, and feature enhancements for audio.

External Input and Special Functions

Settings for external inputs, S-VIDEO signals, and dubbing functions.

Features Overview

Details on Sleep Timer, Child Lock, and Blue Back features.

Installation and Channel Management

Steps for installing channels, managing program numbers, and manual tuning.

Additional Operations

Guides on Automatic Channel Installation (ACI) and transferring data to a VCR.

Preparation, Troubleshooting, and Specifications

Connecting External Equipment

Comprehensive guide to connecting external devices like VCRs, DVD players, and audio systems.

Troubleshooting Common Issues

Step-by-step solutions for common TV operational problems like picture, sound, and remote control issues.

Product Specifications

Technical specifications including model numbers, broadcasting systems, connectivity, and physical attributes.