EasyManuals Logo
Home>JVC>Car Receiver>KD-A615

JVC KD-A615 User Manual

JVC KD-A615
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
32 ENGLISH
Symptom Remedy/Cause
USB device playback
“CANNOT PLAY” flashes on
the display.
“NO USB” appears on the
display.
The unit cannot detect the
USB device.
Attach a USB device that contains tracks encoded in
an appropriate format.
Reattach the USB device again.
While playing a track, sound is
sometimes interrupted.
The MP3/WMA tracks have not been properly copied
into the USB device.
Copy MP3/WMA tracks again into the USB device, and
try again.
Correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols. (
8)
Bluetooth *
2
Bluetooth device does not
detect the unit.
The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the
Bluetooth device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. ( 11)
The unit does not make pairing
with the Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Select the device name from “SPECIAL,” then try to
connect again. ( 12)
Try to pair/connect from the Bluetooth device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or
skipped during playback of a
Bluetooth audio device.
Reduce the distance between the unit and the
Bluetooth audio device.
Disconnect the device connected for “BT-PHONE.”
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the
device again.
The connected audio device
cannot be controlled.
Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
EN28-35_KD-R616_001A_3.indd 32EN28-35_KD-R616_001A_3.indd 32 11/24/09 5:16:41 PM11/24/09 5:16:41 PM

Table of Contents

Other manuals for JVC KD-A615

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-A615 and is the answer not in the manual?

JVC KD-A615 Specifications

General IconGeneral
BrandJVC
ModelKD-A615
CategoryCar Receiver
LanguageEnglish

Related product manuals