JVC KD-G801 User Manual

26
ENGLISH
Refer also to “CD OPERATIONS” on pages
21 to 24.
Playing a disc
1 Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD/CD-CH (for KD-G801) or CD (for
KD-G701) turns on the unit and starts playback
automatically.
2 Insert a disc into the loading slot.
The unit draws the
disc, the control
panel goes back to
the previous position
(see page 40), and
playback starts
automatically.
All files will be played repeatedly until you
stop playback.
MP3/WMA OPERATIONS
The display changes to show the following:
*
1
When “CLOCK DISP” is set to “CLK DISP ON”
(see page 36), the current indication will soon
change to the clock time.
*
2
WMA or MP3 indicator lights up depending on the
first detected file.
Notes:
• MP3/WMA discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 27.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
Ex.: When the disc contains 19 folders
and 144 MP3/WMA files
Total file
number
Total folder
number
CD indicator
Current source
indication*
1
MP3 or WMA indicator*
2
EN26-30_G801_G701[E_EX]f.p65 1/6/04, 12:08 PM26

JVC KD-G801 Specifications