EasyManuals Logo
Home>JVC>Car Receiver>KD-X50BT

JVC KD-X50BT Instruction Manual

JVC KD-X50BT
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Menu item
Selectable setting (Initial: [XX])
AUDIO
VOL ADJUST
(Volume adjust)
-05 — +05[00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (VOL ADJ FIX appears if FM is selected.)
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W: Subwoofer
[REAR]: Speakers
SUB. W *6
(Subwoofer)
OFF: Cancels.
[ON]: Turns on the subwoofer output.
SUB.W LPF *7
(Subwoofer low-
pass filter)
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL *7
(Subwoofer level)
00 — 08[08]: Adjusts the subwoofer output level.
HPF *7
(High-pass filter)
ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]/OFF: Activates or deactivates the keypress tone.
AMP GAIN
(Amplifier gain)
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
TUNER
SSM
For settings, ' page 6. (Displayed only when the source is FM.)
AREA
(Frequency
tuning interval)
[AREA US]: For North/Central/South America, AM/FM intervals: 10kHz/200kHz.
AREA EU: For any other areas, AM/FM intervals: 9kHz/50kHz.
AREA SA: For some South American countries, AM/FM intervals: 10kHz/50kHz.
MONO
(Monaural mode)
Displayed only when the source is FM.
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings, ' page 7.
*6 Displayed only when <L/O MODE> is set to <SUB.W>.
*7 Displayed only when <SUB.W> is set to <ON>.
Menu operations
22
|ޓENGLISH
2012/1/17ޓ23:52:37KD-X50BT_J_EN

Table of Contents

Other manuals for JVC KD-X50BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X50BT and is the answer not in the manual?

JVC KD-X50BT Specifications

General IconGeneral
MP3 playbackYes
CD-R playbackNo
Audio formats supportedMP3, WAV, WMA
Tuner typeHS-IVi
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsFM, LW, MW
Preset stations quantity24
Product colorBlack
Line outputs (RCA)2
Weight and Dimensions IconWeight and Dimensions
Weight900 g

Related product manuals