DAB
21English
DAB
DAB Basic Operation
Most functions can be controlled from the
source control screen.
To enter DAB source, touch [DAB] icon in the
source selection screen. (P.9)
Control screen
5 6
321 4
7
Open the drawer
75 8
1
Artwork area
The picture data is displayed if available from
current content.
Touch to switch between the Control and
Information screen.
[P#]: Preset number
[CH#]: Channel display
2
Seek mode
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a ensemble with good
reception automatically.
• [AUTO2]: Tunes in ensemble in memory one
after another.
• [MANUAL]: Switches to the next ensemble
manually.
3
Indicator display
Displays the received signal strength.
4
Information display
Displays the information of the current station:
Service Name
Touching [ ] allows you to switch between
Content A, Content B and Content C.
– Content A: Ensemble name, PTY Genre
– Content B: Song Title, Artist Name, DLS
– Content C: Now Playing, Next Program, Audio
Quality
5
Function panel
Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.
• [TI]: Sets the traffic information mode on. For
details, see Trac Information (P.23).
• [SETUP]: Displays the DAB SETUP screen. For
details, see DAB Setup (P.24).
• [PTY]: Searches a program by setting program
type. For details, see Search by program
type (P.22).
• [DLS]: Display the Dynamic Label Segment
screen.
6
Operation keys
• [1] : Displays the Service List screen. For details
on search operation, see Service search
(P.23).
• [E] [F] : Tunes in a ensemble, service, and
component. The seek mode switching can be
changed (see
2
in table).
• [
] : Touch to mute or not to mute.
!B5H-0357-06_JVC_KWM_E_En.indb 21 2020/08/21 13:43
To Next Page
Loading...
Need help?
General
Weight and Dimensions
