42
SETTINGSSETTINGS
5 Capture the image displayed on the
screen.
A confirmation message appears. Press [Yes] to
store the newly captured image. (The existing
image is replaced with the new one.)
• Press [No] to return to the previous screen.
*
1
Not displayed when playing an external component connected to
the AV-IN1 terminal.
*
2
Not displayed when <Full> is selected.
Customizing the system settings
❏ Memorizing/recalling the settings
You can memorize the following settings:
• Settings on the <Settings> screen: Fader/
Balance, Equalizer, Loudness, Crossover
(<HPF>/<LPF>/<SW Level> settings), Volume
Adjust, Speaker Select, Dimmer, Display
Design, AV Input, Camera Input, Navigation
Input
• Settings for “AV-IN”: AV-IN Name
Memorizing your settings
1 Display the <User Profile> screen.
On the <HOME> screen:
2
3 Select an item ([User1], [User2] or
[User3]) to memorize the settings.
A confirmation message appears. Press [Yes].
4 Finish the procedure.
Recalling your settings
• Turn off the AV source by pressing [AV Off] on the
<HOME> screen and select “AV Off”* as the rear
source beforehand.
* For KW-V40BT/KW-V20BT/KW-V200BT/KW-V10
Region 1/KW-V100
1 Display the <User Profile> screen. (See
the left column.)
2 Select the item you want to recall.
A confirmation message appears. Press [Yes].
3 Finish the procedure.
09Settings.indd4209Settings.indd42 13/12/1316:1313/12/1316:13
To Next Page
Loading...
Need help?
General
