JVC KW-V100 User Manual

60
R USB
“Now Reading...” does not disappear from the
screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
R iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” of the iPod/iPhone.
For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
• Operate the unit after the Artwork is loaded.
Sound does not synchronize with the video.
• Select [iPod] for <AV Input>. (Page45)
Videos cannot be played.
• Connect with USB Audio and Video cable JVC
KS-U59 . Other cables cannot be used.
• Select [iPod] for <AV Input>. (Page45)
No sound of videos comes out.
• Connect with USB Audio and Video cable JVC
KS-U59 . Other cables cannot be used.
• Select [iPod] for <AV Input>. (Page45)
R Tuner
SSM automatic presetting does not work.
• Store stations manually. (Page 22 )
Static noise while listening to the radio.
• Connect the antenna firmly.
R AV-IN
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
R Pandora (Only for KW-V40BT Region 1/
KW-V20BT Region 1/KW-V10 Region 1)
The Pandora application does not work.
• The Pandora application on your iPod touch/
iPhone/Android is not the latest version. Update
the application.
R Bluetooth (Only for KW-V40BT/
KW-V20BT/KW-V200BT )
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
REFERENCESREFERENCES
KW-VEntryJ.indb60KW-VEntryJ.indb60 2013/10/3016:052013/10/3016:05

JVC KW-V100 Specifications

General

Brand	JVC
Model	KW-V100
Category	Monitor
Language	English