JVC KW-V250BT User Manual

SettingsSettings
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer
off), then change the following settings:
<Bright>
Adjusts brightness.
• –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer
off)
<Black>
Adjusts blackness.
• –10 to +10 (Initial: 0)
<Video Output>
Select the color system of the external monitor.
• NTSC (Initial)/PAL
“Please Power Off” appears when the setting is
changed. Turn off the power, then turn on to enable
the change.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
Input settings
Display the <Input> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Input].
Settings
Rear Camera
Parking Assist
Enter
Enter
System
Audio
Display
Input
Key
E.g. Input settings screen for KW-V250BT/
KW-V25BT
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF: Select this when no camera is connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the mark (1), then adjust the position of the
selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Parking Assist>
(Only for KW-V350BT Region 1)
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the sensor
detects obstacles.
• OFF: Cancels.
46
ENGLISH
00_KWV_2019ST_KR.indb 4600_KWV_2019ST_KR.indb 46 1/6/2018 8:19:21 AM1/6/2018 8:19:21 AM

JVC KW-V250BT Specifications

General

Dimmer	Yes
DIN size	2 DIN
Output power	- W
Product color	Black
Disc types supported	CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Audio output channels	- channels
Equalizer bands quantity	13
Maximum power per channel	50 W
Analog signal format system	NTSC, PAL
Display type	LCD
Display diagonal	6.2 \
Display resolution	800 x 480 pixels
Illumination color	White
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPEG
Video formats supported	DIVX, MPEG1, MPEG2
USB version	2.0
Bluetooth version	3.0+HS
USB port position	Front
Bluetooth profiles	A2DP, AVRCP
USB connector type	USB Type-A
USB ports quantity	1
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
AM band range	531 - 1611 kHz
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Preset stations quantity	20
Package weight	2900 g

Weight and Dimensions

Depth	111 mm
Width	182 mm
Height	160 mm
Weight	2000 g