Remote control
84
Key
Name
Function
FM/R
AM/S
Selects the folder to be played.
For the HD Radio source, selects FM/
AM band to be received.
For the SiriusXM source, selects the
band to be received.
E 2
F 3
Selects the track or file to be played.
For the HD Radio and SiriusXM
sources, switches to broadcast stations
received by the unit.
For the HD Radio and SiriusXM
sources, switches the seek mode.
ANGLE Not used.
When a call comes in, answers the call.
DIRECT Switches to the direct search mode.
For details on the direct search mode,
see Direct search mode (P.84).
ASPECT Changes the aspect ratio.
• To confirm the current aspect ratio
setting, operate on the touch panel.
(P.63)
Numeric
Keypad
• Allows you to enter the number to
search in the direct search mode.
For details on the direct search
mode, see Direct search mode
(P.84).
• For the HD Radio and SiriusXM
sources, allows you to enter the
preset number.
– If the preset number is single
digit, press the number.
– If the preset number is double
digits, press continuously the
numbers within 3 seconds.
– Pressing [E] or [F] within 3
seconds allows you to determine
the preset number of single digit.
CLR Not used.
ENT Not used.
Ñ Direct search mode
Using the remote control, you can jump
directly to the desired channel by entering the
number corresponding to the content.
NOTE
• This operation cannot be performed for the USB
device and iPod.
1
Press the [DIRECT] button several times
until the desired content appears.
The available contents are different
depending on the source type.
■ HD Radio tuner
Frequency value/Channel number
■ SiriusXM
Channel number
2
Enter the number of the content you want
to play using the numeric keypad.
3
Press the [E] or [F] button.
The content corresponding to the
number you entered is played.
To Next Page
Loading...
Need help?
General
