JVC LT-32DP9BU User Manual

24
LCD
S
T
B
A
UDIO
MENUTOP
GUIDE
GUIDE
DT V AT V R A DI O
You can congure your TV’s remote control to operate your other devices.
1
Turn on the device manually.
2
Switch the remote control mode to a mode
that matches your device. Refer to the
table on the right to select an appropriate
mode.
The indicator lights for 3 seconds each time the
remote control is operated.

3
Find the remote control code for your
device according to its brand from the
“Remote control codes” list. (Refer to
P. I - X at the back of this manual.)
Conguring your remote control
TV STB
AUDIO DVD
4
Set the remote control code.
Press and hold Enter four digit
number
Release the button
5
Point the remote control at your device, press and
conrm that your device is turned off. If your device does
not respond, try entering another available code.
Note
If your device does not respond, try all the available codes for the device’s
brand.
If none of the code works, or the brand is not listed, refer to “Using the
search code function” (P. 25).


MODE Applicable devices
TV JVC brand only
STB Cable Set Top Box, Cable/PVR Combination,
Satellite Set Top Box, SAT/PVR Combination
DVD DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
Theater in Box, TV/DVD Combination
AUDIO Amplier, Receiver, Home Theater in Box
Setting your remote
The indicator will unlit for a seconds after entering the four digit remote
control code number.


JVC LT-32DP9BU Specifications

General

Brand	JVC
Model	LT-32DP9BU
Category	LCD TV
Language	English