JVC MX-K3 User Manual

MX-K3
1-9
Fig.11
Prior to performing the following procedures,
remove the top cover.
Also remove the CD changer unit.
1.
2.
3.
4.
Disconnect the parallel wire and card wire from the
connectors CN1101,CN901,CN951A and CN951B
on the amp. board.
Remove the two screws "H" retaining the front
panel assembly onto the bottom of the body.
Remove the screw "I" retaining the cassette deck
mechanism and then remove the GND lug "b" that
comes from the amp. board.
Disengage the claws "c" on both sides at the
bottom of the front panel assembly and then
remove the assembly.
Removing the front panel assembly
(See Fig.11 and 12)
Fig.12
H
I
Amp. board
Control/FL board
Claw c
GND lug b

JVC MX-K3 Specifications

General

Brand	JVC
Model	MX-K3
Category	Speaker System
Language	English