16
Bluetooth® Operation
Switch the speaker on. The unit will nd the last paired Bluetooth®
device and connect automatically.
If there is no previously paired device found, the speaker will
enter Bluetooth® pairing mode automatically. The light of
button
will ash rapidly. Follow the steps below to pair the unit with a
Bluetooth® device.
Activate your Bluetooth® device and select the search mode. “SP-
AD50-B” or “SP-AD50-W” will appear on your Bluetooth® device list.
1. Select “SP-AD50-B” or “SP-AD50-W” and enter “0000” for the
password if necessary. If connect successful, the light of
button
will light up and the unit will voice “Connected”.
2. To disconnect the Bluetooth® function, press and hold
button
to disable the function from your Bluetooth® device. The
Bluetooth® device will be disconnected from the unit after the
“Waiting for connection” voice prompt.
•Connect the stereo audio cable to disable Bluetooth® mode.
•You can enjoy music wirelessly from a smartphone, mobile phone, or music
player. Also, you can make or receive a call by operating the unit.
To Next Page
Loading...
Need help?
General
