12
• Make sure the jack cover and surrounding surfaces are completely dry
before opening the jack cover to prevent moisture from damaging the
internal electronics.
• Keep the jack cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the jack cover
is not making a tight waterproof seal water may enter the unit.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
Important Information about Water Resistant Operation
For proper water resistant operation, make sure the jack cover on the left
side of the unit is completely ush with the unit by pressing along the
entire edge of the cover until it is completely and securely in place.
• The unit is IP54 splash proof rated, meaning the water splashing against
the product from any direction shall have no harmful eect in 10L
water volume per minute at an 80–100 kPa pressure in 5 minutes. It will
typically withstand rain and snow.
water
tight
Not water
tight
DO NOT immerse the unit in water. It may cause product failure.
SP-AD70-A_B_IB_Final180717V5.indd 12 30/7/2018 11:04 AM
To Next Page
Loading...
Need help?
General
