15
Connection
Using the AUX Connection
Use the supplied 3.5mm to 3.5mm stereo audio cable to
connect the headphone socket of an audio device and
the AUX socket of the unit.
The unit will switch the source to AUX mode
automatically, and you will hear a message from the
speaker.
Disconnect the audio cable to enable Bluetooth® mode.
5V IN
RESET
AUX
3.5mm to 3.5mm
stereo audio cable
(included)
General Operation
Powering ON/OFF
• Press button to switch on the unit. You will hear a greeting message.
• Press and hold button to switch o the unit.
SP-AD70-A_B_IB_Final180717V5.indd 15 30/7/2018 11:04 AM
To Next Page
Loading...
Need help?
General
