1-12 (No.YD125<Rev.001>)
5.9 DISPLAYING MAINTENANCE MODE
MAINTENANCE MODE contains information about the HDD and the drive unit.
(1) Displaying MAINTENANCE Top Menu
a) Turn off the power of the main unit.
b) Press the [REC] button and the [RESET] switch on the main unit at the same time.
c) “SERVICE” is displayed in the display window on the main unit. In about 30 seconds, the MAINTENANCE Top Menu is
displayed on the TV screen.
d) To exit MAINTENANCE MODE, press the POWER button on the main unit.
(2) Displaying Product Information
Product Information contains the firmware version information of the main unit and the drive unit.
a) While the MAINTENANCE Top Menu is displayed, press the [1] button on the supplied remote control to display Product
Information on the TV screen.
b) To go back to the MAINTENANCE Top Menu, press the [Return] button on the remote control.
To exit MAINTENANCE MODE, press the POWER button on the main unit.
MAINTENANCE MODE
Press key
[1] key : Product Information
[2] key : Temperature Information
[3] key : Laser Diode Information
[4] key : HDD SMART Information
[5] key : REBOOT COUNT Information
[Power off] : Exit
MAINTENANCE MODE > Product Information
[Return] : Top Menu, [Power off] : Exit
<<<Reviesion>>>
Middle Ware Version : xxxx
NAND Version : xxxx
Application Version : xxxx
NOR Version : xxxx
Drive Version
<<<Information>>>
Vendor Name : JVC
Model Name : SR-HDxxxx
1394 Serial Num : xxxxxxxxx
ID : xxxx
Farm Version : xxxx
To Next Page
Loading...
Need help?
General
