To Next Page

To Previous Page

General Operation

Standby / ON

When you rst connect the unit to the mains socket, the unit will be in Standby mode.

• Press on the unit or on the remote control to switch the unit on.

• Press on the unit or on the remote control again to switch the unit back to Standby

mode. The POWER indicator will light up red.

Automatic Power O Function

The unit automatically turns to Standby mode after about 15 minutes if the TV or the

external unit is disconnected, switched o or the volume is too close to mute.

• To switch the unit o completely, remove the mains plug from the mains socket.

• Please turn the unit o completely to save energy when not in use.

Selecting Modes

Press SOURCE on the unit or remote control repeatedly to select between AUDIO IN,

BLUETOOTH, OPTICAL and COAXIAL mode.

The indicator light on the front of the main unit will show which mode is currently in use.

Adjusting the Speaker Level Settings and Eects

Adjusting the Volume

• Press VOL+/VOL– to adjust the volume.

• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again,

or press VOL+/VOL– on the unit or on the remote control to resume normal listening.

Select Equaliser (EQ) Eect

Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote

control to select the preset equaliser eects.

• When CUSTOM (Default) is selected, the COAXIAL indicator will ash (Orange) once.

• When MOVIE EQ is selected, the OPTICAL indicator will ash (White) once.

• When MUSIC EQ is selected, the BT indicator will ash (Blue) once.

• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch into MOVIE

EQ eect.

• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ eect.

TH-D227B_IB_FInal171017V3.indd 16 17/10/2017 4:37 PM

JVC TH-D227B User Manual

Other manuals for JVC TH-D227B