JVC TH-U1 Series User Manual

14
Basic operations
The system turns off automatically when the specified
period of time has passed.
Press SLEEP while holding SHIFT.
Each time you repeat the procedure, the shut-off time
changes.
Example:
To check the remaining time
Press SLEEP once while holding SHIFT.
To change the remaining time
Press SLEEP repeatedly while holding SHIFT.
To cancel
Press SLEEP repeatedly while holding SHIFT , until “SLEEP – –”
appears.
• Turning off the power also cancels the Sleep Timer.
The system can be accommodated to your TV’s video input
mode.
7While DVD or USB MEMORY is selected as the source
and before playback
1 Press and hold SCAN MODE for 2
seconds.
The current setting appears in the display window.
2 Press Cursor 3/2 to select the
desired mode.
Select one of the following:
• RGB: Select this if your TV accommodates interlaced
RGB/composite video input.
• Y/C: Select this if your TV accommodates interlaced
S-video input.
You can get better picture quality in the following order
— “RGB” > “Y/C” > “composite”
3 Press ENTER while the selected
mode is displayed.
NOTE
• Although the picture may be distorted when you press
ENTER, this is not a malfunction of the system.
• “RGB” is selected when shipped from the factory.
Sleep Timer [SLEEP]
minutes
Changing video output mode
See page 12 for button locations.
EN_TH-U1[B]-03body.fm Page 14 Wednesday, July 25, 2007 4:06 PM

JVC TH-U1 Series Specifications

General

Brand	JVC
Model	TH-U1 Series
Category	DVD Player
Language	English