JVC TM-H140PN User Manual

z
0
CJ1
-..J
0)
0)
6
I CONTROLS ANID FEATURES (cont'd)
REAR VIEW--------------
<Rear Panel>
:;:~
To AC outlet+ ~,~ -----
(230 V AC, I.._~ European-type
50 Hz/60 Hz)
~Audio B terminals [AUDIO BIN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B termi nals [ill or
VIDEO B (Y/C) terminals ill].
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
( Notes:)
• For corresponding video signals, use the VIDEO B
terminals [ill or VIDEO B (Y/C) terminals ill].
• Also refer to BASIC CONNECTION EXAMPLE
on pages 12 and 13.
~ Remote terminals
[REMOTE INPUT A/B, ASPECT]
Remote terminals for external control. Selecting INPUT A
or INPUT Band the ASPECT RATIO is available via
external control. External control is set in the <SET-UP
MENU> screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
External control
External control switch
functions
Open circuit Closed circuit
(open) (short)
ASPECT RATIO 4-3 (4:3) 16-9 (16:9)
INPUTA/B INPUT A INPUT B
( Notes:)
• Also refer to BASIC CONNECTION EXAMPLE on
pages 12 and 13.
~AC inlet [AC IN]
Power input connector. Connect the provided AC power
cord ill] to an AC outlet (230 V AC, 50 Hz/60 Hz).
~I Power cord
Connects the provided power cord (230 V AC, 50 Hz/
60 Hz) to the AC IN connector.
Caution:
This monitor includes two power cords: one with a United
Kingdom-type plug and the other with a European-type
plug. The plug on the United Kingdom-type power cord
has a built-in fuse. Be sure to use the proper power cord
for the AC outlet in your country. If neither can be used,
please contact your dealer or qualified service personne l
for the correct power cord.
I HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION-----------
1. Press the POWER switch to turn on the power.
<D
,_______lFil-ON
- L_JI OFF
~ON : Power turns ON. (Power indicator: lit)
•OFF : Power turns OFF. (Power indicator: unlit)
2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected INPUT SELECT indicator lights in green.
INPUT
Terminals on the rear panel
SELECT
button
Video signal input Audio signal input
(i) Input A
VIDEO A terminal AUDIO A terminal
(VIDEO)
(D Input B
VIDEO 8 terminal
AUDIO 8 terminal
(VIDEO /
Y/C)
VIDEO 8 (Y/C) termina l
* When both VIDEO B terminals are connected (input) at the same time, the
Y/C terminal is given priority.
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (00 --+ 50)
- : The Built-in speaker volume is decreased. (50 --+ 00)
• Screen indication will disappear about 10 seconds after
operating.
i--- STATUS indication
I (PAL or NTSC)
I
PAL
About the STATUS indication
• With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the colour
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected
It does not appear when receiving a
8/W signa. I o.r when no signal is input I
Refer to page 8 for more 1nformat1on
about COLOR SYSTEM setting and
page 9 for more ,nformat,on about
STATUS 1nd1cat1on setting
00 ~ 50
,owMe [+-
j
-- 1-+
PICTURE ADJUSTMENT---------
1. Press select buttons corresponding to the item
you want to adjust.
[g) 0 (CJ (CJ
PH.A.SE Q-lFOv1A. 8RIG--!T GC.X'ffRAST
cb cb cb cb
The item you select is displayed on the screen.
CD PHASE ( ,cib ) : Phase control
0 CHROMA ( ~) : Chroma control
G) BRIGHT ( <) ) : Brightness control
G) CONTRAST ( c) ) : Contrast control
2. Adjust with the VOLUME/SELECT buttons.
[@}~
Items
VOLUME/SELECT button
- +
PHASE
reddish greenish
(Phase)
CHROMA
lighter deeper
(Chroma)
BRIGHT
darker
brighter
(Brightness)
CONTRAST
lower higher
(Contrast)
* Screen indication will disappear about 1 O seconds after operating.
PHASE
--1-+
( Notes: J
• Phase control is effective only in the
NTSC colour system mode.
• Chroma control is not effective when
receiving 8/W or when no signal is
input. (Except when a component
signal is input.)
• When CHROMA is adjusted to "-40,"
the picture becomes less colourful.
• "NO EFFECT' is displayed (for about
3 seconds) when your selected
function has no effect.
7
-I
s::
±
+:>-
0
""CJ
z

JVC TM-H140PN Specifications

General

Brand	JVC
Model	TM-H140PN
Category	Monitor
Language	English