25
Using the USB
By connecting a USB mass storage device (including
USB ash memory, USB ash players or memory cards)
to this unit, you can enjoy the device’s stored music
through the unit.
1. Insert the USB device’s USB plug into the
socket at the front of unit.
2. Press the SOURCE button on the unit or USB
button on the remote control to select the USB
source. The word “USB” will be shown on the
display.
3. All playback features are the same as if you
were playing an MP3 CD.
• The player supports the USB music le format of MP3 only.
• If your USB device is loaded with MP3 les but the display keeps showing ‘NO USB” on the display, the
format of your USB device might not be compatible with the unit.
• The unit can support USB devices with up to 64GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
AUX / OPTICAL / COAXIAL Operation
1. While in ON mode, press the SOURCE button on the unit or press AUX / OPTICAL /
COAXIAL on the remote control to select the AUX / OPTICAL / COAXIAL source. The
corresponding mode will be shown on the display.
2. Operate your audio device directly for playback features.
3. Press VOL + / – to adjust the volume to your desired level.
While using COAXIAL / OPTICAL mode, ensure the audio setting of the input source (e.g. TV, games
console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio
setting details) with optical / coaxial output.
UX-D427S_IB_FInal180625V3.indd 25 26/6/2018 5:30 PM
To Next Page
Loading...
Need help?
General
