To Next Page

To Previous Page

• The operational range between the unit and the device is approximately 8 metres.

• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.

• Compatibility with all Bluetooth® devices is not guaranteed.

• Any obstacle between the device and the unit can reduce operational range.

• Keep this player away from other electronic devices that may cause interference.

• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous

connection.

• The player will also be disconnected when your device is moved beyond the operational range.

Bluetooth® Operation

Pairing the unit with a Bluetooth® device to listen to music:

1. Press the SOURCE button on the unit or directly press the BT button on the remote

control to select the Bluetooth® mode. The display will show “BT READY”.

2. Activate your Bluetooth® device and select the search mode. “UX-D427S” will appear on

your Bluetooth® device list.

3. If you cannot nd the unit, press and hold the button on the unit or / PAIR button

on the remote to enter PAIRING MODE. The unit display will show “PAIR” and the voice

prompt “PAIRING“ will be heard.

4. Select “UX-D427S” and enter “0000” for the password if necessary. If connection is

successful, the display will show “BT” followed by the voice prompt stating “PAIRED”.

5. To disconnect the Bluetooth® function, switch to another function on the unit or disable

the function from your Bluetooth® device. You will hear “DISCONNECTED” from the

voice prompt.

If your Bluetooth® device supports A2DP, play music via your device.

If your Bluetooth® device supports AVRCP, use supplied remote control to control play.

• To pause / resume playback, press .

• To skip to a track, press / .

• To increase or decrease the volume, press VOL + / – .

UX-D427S_IB_FInal180625V3.indd 26 26/6/2018 5:30 PM

JVC UX-D427S User Manual

Questions and Answers: