JVC UX-D457S User Manual

17
Preset Equalizer
You can adjust the sound reproduced simply by choosing from 6 preset equalizers.
During play, press the EQ button on the remote control repeatedly to select: DEFAULT /
POP / CLASSIC / ROCK / JAZZ.
Adjusting the Bass
Press the BASS/TREB button on the unit repeatedly to activate bass setup. Then turn the
- BASS/TREB + dial on the unit to adjust the intensity of the bass output sound. Or press
the BASS + / – button on the remote control.
If bass is adjusted, preset equalizer function is not available.
Adjusting the Treble
Press the BASS/TREB button on the unit repeatedly to activate treble setup. Turn the -
BASS/TREB + dial on the unit to adjust the intensity of the treble output sound. Or press
the TREB + / – button on the remote control.
If treble is adjusted, preset equalizer function is not available.
Adjusting the Display Brightness
Press DIMMER on the remote control to select the brightness level.
The EQ settings (including BASS and TREBLE) are not available when you are using headphones. It is not
a defect.

JVC UX-D457S Specifications

General

Brand	JVC
Model	UX-D457S
Category	Stereo System
Language	English