To Next Page

To Previous Page

Using the USB

By connecting a USB mass storage device

(including USB ash memory, USB ash players

or memory cards) to this unit, you can enjoy the

device’s stored music through the unit.

1. Insert the USB device’s USB plug into the

socket at the rear of unit.

2. Press the

SOURCE button on the unit or

USB button on the remote control to select

the USB source. The word “USB” will be

shown on the display.

3. All playback features are the same as if you

were playing an MP3.

• The player supports the USB music le format of MP3 only.

• If your USB device is loaded with MP3 les but “NO USB” blinks on the display, the format of your USB

device might not be compatible with the unit.

• The unit can support USB devices with up to 64GB of memory.

• The unit may not be compatible with all USB devices, this is not an indication of a problem with the

unit.

AUX / OPTICAL / COAXIAL Operation

1. While in ON mode, press the SOURCE button on the unit repeatedly or press AUX

/ OPTICAL / COAXIAL on the remote control to select the AUX / OPTICAL / COAXIAL

source. The corresponding mode will be shown on the display.

2. Operate your audio device directly for playback features.

3. Press VOL + / – to adjust the volume to your desired level.

Rear View of the Main Unit

JVC UX-D457S User Manual

Questions and Answers: