8
Listening to the Radio
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing. Before operating the tuner,
select the appropriate AM tuner interval spacing used for
your area.
1 Select “AM,” then turn off (standby) the System.
2 Select the AM tuner interval spacing.
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search,
press either button.
If the FM reception is poor
The MONO indicator lights on the display. Reception will
improve though stereo effect is lost—Monaural reception.
To restore the stereo effect,
press the button again (the
MONO indicator disappears).
If the beats are heard while listening to
AM station
• If you change to another station, this setting is
automatically canceled.
How to select a number
To select 9 kHz:
To select 10 kHz:
DIMMER
A.STANDBY
SLEEP
VFP
3D P/HP S
CLOCK/TIMER
ZOOM
RETURN
SCAN MODE
1
4
7
10
2
5
8
3
6
9
10
ANGLE
C.VOICE
0
CANCEL
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press 10, 1,
then 5.
To select number 30, press 10, 3,
then 0.
To select number 125, press 10,
10, 1, 2, then 5.
INFO
Main Unit
ONLY
FM
AM
(while holding...)
(while holding...)
FM
AM
GROUP/TITLE SKIP
2 sec.
Remote
ONLY
FM/PLAY
MODE
Remote
ONLY
FM/PLAY
MODE
BCUT ON
BCUT OFF
(Canceled)
UX-G48[U].book Page 8 Friday, July 13, 2007 5:01 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
