EasyManuals Logo
Home>JVC>Stereo System>UX-G48

JVC UX-G48 User Manual

JVC UX-G48
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
35
On-Screen Operations (see pages 23 to 27)
On-screen Bar Operations:
For DVD-VR, “PG” or “PL” appears instead of “TITLE”
on the on-screen bar.
Daily Timer Operations (see pages 28 and 29)
Setting the Daily Timer:
If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
When you unplug the power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
If you set DVD Video as the source, Daily Timer will not
work correctly.
If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
Setup Menu Operations (see pages 30 and 31)
General:
If the upper and lower parts of the menu are cut off, adjust
the picture size control of the TV.
LANGUAGE menu:
When the language you have selected for “MENU
LANGUAGE,” “AUDIO LANGUAGE,” or
“SUBTITLE” is not recorded, the original language is used
as the initial language.
PICTURE menu—MONITOR TYPE:
Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size
may become 4:3 letter box while playing a disc/file. This
depends on how they are recorded.
When you select “16:9 NORMAL/16:9 MULTI
NORMAL” or “16:9 AUTO/16:9 MULTI AUTO” for a
picture whose aspect ratio is 4:3, the picture slightly
changes due to the process for converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
The setup menu and on-screen bar will be displayed (and
recorded) even if this function is set to “OFF.”
Subtitles and the information for zoom-in always appear on
the display regardless of this setting.
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling discs
Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
Do not touch the shiny surface of the disc, or bend the disc.
Put the disc back in its case after use to prevent warping.
Be careful not to scratch the surface of the disc when
placing it back in its case.
Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
DO NOT wipe it with a hard cloth.
DO NOT wipe it forcefully.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substance such as
insecticides to it.
DO NOT allow any rubber or plastic to remain in contact
for a long time.
To remove the speaker grilles:
Holes
Speaker grille
Projection
UX-G48[U].book Page 35 Friday, July 13, 2007 5:01 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-G48 and is the answer not in the manual?

JVC UX-G48 Specifications

General IconGeneral
Impedance6 Ω
RMS rated power20 W
Signal-to-Noise Ratio (SNR)80 dB
EqualizerYes
Volume controlDigital
Supported radio bandsAM, FM
TypeHome audio micro system
Speakers2-Way, Bass-Reflex
Media types supportedMP3, WMA, WAV, JPEG
USB 2.0 ports quantity1
Weight and Dimensions IconWeight and Dimensions
Weight2500 g
Center speaker weight1800 g
Center speaker dimensions (WxDxH)145 x 176 x 250 mm

Related product manuals