kala Mistral 1650 User Manual

14
6.4 Application and film installation
The table below showes the position of the media depending on the application
Cold lamination film
application
Position 1 Position 2 Position 3 Position 4
Single side lamination with
waste paper
Lamination
film
Take up of the
protection liner
Waste
paper
Single side lamination
directly on a print roll
installed on the machine for
a long run
Lamination
film
Take up of the
protection liner
Print roll
Single side lamination with
double sided adhesive
simultaneously
Lamination
film
Take up of the
protection liner
Double
sided
adhesive
Single side lamination with
double sided adhesive
using 2 protection paper
Lamination
film
Take up of the
protection liner
Double
sided
adhesive
Take up of the
double sided
adhesive
protection liner
Application tape Application
tape
Application tape should be fed directly to the
roller without going under the separation bar
Lamination of boards,
application of colour vinyl
onto a board
Lamination
film or vinyl
Take up of the
protection liner
Encapsulation (both side
lamination)
Upper
lamination
film
Take up of the
upper film
protection liner
Lower
lamination
film
Take up of the
lower film
protection liner
1
2
3
4

kala Mistral 1650 Specifications

General

Brand	kala
Model	Mistral 1650
Category	Laminator
Language	English