Summary
1. INSTALLING THE MACHINE
- 1.1 Select the location where the machine should be installed.
- 1.2 Unpacking the machine.
2. CAUTION WHEN INSTALLING THE MACHINE.
- 2.1 Electrical power requirement
- 2.2 Installation
- 2.3 Safety
-
3. EXPLODED VIEWS AND CONTROL BOARD.
- 3.1 Exploded view of the machine.
- 3.2 Control board.
4. ADJUSTMENTS AND RECOMMANDATIONS
- 4.1 Switching on the machine p 8
- 4.2 Temperature p 8
- 4.3 Roller nip and pressure adjustments p 8
- 4.4 Speed adjustment p 9
- 4.5 Forward and reverse p 9
- 4.6 Memories p 9
- 4.7 Foot switch p 10
- 4.8 Film tension adjustment p 10
5. HIGHLIGHTS OF THE MACHINE
- 5.1 Storage of film reels on the machine p 11
- 5.2 Feeding tray p 11
- 5.3 Removable back tray p 12
- 5.4 Unwinding shaft for prints p 12
- 5.5 Safety cutter p 12
- 5.6 Feeding plate p 13
6. FILM INSTALLATION
- 6.1 Loading a reel on a self blocking shaft p 13
- 6.2 Loading a self blocking shaft on the machine p 13
- 6.3 Winding of the film reel p 13
- 6.4 Application and film installation p 14
- 6.5 Roll to Roll operation p 20
- 6.6 Print feeding p 21
7. TECHNICAL DATA p 22
8. CLEANING, MAINTENANCE AND RECYCLING p 22
To Next Page
Loading...
Need help?
General
