kala Mistral 1650 User Manual

21
6.6 Print feeding
Select pressure and starting speed. Select footswitch on the control panel (Rep. ) if needed.
Feed the print maintaining it straight and tight at each corner.
For easier process to keep the print flat, slide it under the paper guide in front of the roller.
Press forward on the control panel or on the foot switch to start.
Maintain the print until it is fed through the rollers.
Let run through the machine.
Press stop on the control panel or on the foot switch when finished.

kala Mistral 1650 Specifications

General

Brand	kala
Model	Mistral 1650
Category	Laminator
Language	English