PRE-DELIVERY INSPECTION
In order for KEEWAY America to maintain its high standards of quality, it is necessary
for each dealer to thoroughly inspect each unit before their customer takes delivery.
INITIAL:
Wash entire vehicle with warm water and wipe dry with a soft cloth. DO NOT
USE SOAP OR TERRY CLOTH.
Inspect paint sheen and decal quality.
Ensure all fasteners have appropriate torque, to include visible body screws, axle
and exhaust nuts, engine and carburetor bolts, etc.
Ensure proper operation of all lock cylinders.
Verify that a new, fully charged battery has been installed.
Inspect vehicle electrical system, including switch and control operations.
Ensure proper operation and adjustment of levers, throttle and rear brake cables.
Ensure proper front and rear brake operation, including fluid level, and adjust as
needed.
Verify spark plug gap, and adjust accordingly.
Start engine and bring to operating temperature. Check fluid levels, and add if
necessary.
Check and adjust idle speed as needed.
Ensure free travel of both wheels.
Check tire pressure, and adjust accordingly.
Verify proper operation of remote-start system.
To Next Page
Loading...
Need help?
General
