KEEWAY 50cc Series User Manual

64
Installation
Triple clamp, washer, and spacer (9, 10, & 14)
Assemble lower bearing assembly (parts 7, 8, & 16; recommend heavy coat of grease
and constant pressure to maintain proper fit.), and position above spacer (9) on triple
clamp stem. Ensure assembly remains together.
Slide triple clamp assembly up into frame (20), ensuring proper fit of bearing assembly.
A rubber mallet may be used.
Assemble and install upper bearing assembly (5, 6, & 16.1) in the same manner as the
lower bearing assembly. Again, a rubber mallet may be used.
Install dust cover, external thread nut, seal, and retaining nut (1, 2, 3, & 4).
LH and RH shock absorbers (12 & 13)
Install M10x1.25x40 bolts (17).
NOTE: KEEWAY America discourages disassembly of shock absorber assemblies for the
purposes of repairing and reinstalling on KEEWAY units. Always replace the entire
assembly, and replace them in pairs.

KEEWAY 50cc Series Specifications

General

Brand	KEEWAY
Model	50cc Series
Category	Scooter
Language	English