Keith McMillen Instruments 12 Step User Manual

(6) Curve
Sets the type of curve to apply to the incoming values. For a complete list of all available tables
(and what they do) see the Curves section of the Appendix.
(7) Min
Sets the minimum value that can be output. All values below the minimum will be clipped to
this value —!they are not ignored.
(8) Max
Sets the maximum value that can be output. All values above the maximum will be clipped to
this value — they are not ignored.
(9) Add/Delete Modlines
The “plus” button adds a modline (maximum of 6 per preset) and the “minus” button deletes a
modline (minimum of 2). Adding a modline will place a new at the bottom of the list. Deleting a
modline will remove the bottom modline from the list.
When deleting a modline, the Message Type and Sources will automatically be set to “Off”. All
other settings (Gain, Offset, Curve, Min, Max) will be preserved.
12 Step Editor 34

Keith McMillen Instruments 12 Step Specifications

General

Brand	Keith McMillen Instruments
Model	12 Step
Category	Extender
Language	English