Unpack and inspect the instrument
To unpack and inspect the instrument:
1. Inspect the box for damage.
2. Open the top of the box.
3. Remove the documentation and accessories.
4. Carefully lift the instrument out of the box.
5. Remove the packaging insert.
6. Inspect the instrument for any obvious signs of physical
damage. Report any damage to the shipping agent
immediately.
You should have received the Series 2280 with the following
accessories:
1. Power line cord
2. Series 2280 Quick Start Guide (this document)
3. LAN crossover cable for ethernet
4. Keithley Instruments Safety Precautions
5. Rear-panel mating connector with cover
Refer to the packing list for additional items that may have
shipped with your instrument.
Do not lift the Series 2280 using the front bezel. Lifting
the instrument by the front bezel can cause instrument
damage.
To Next Page
Loading...
Need help?
General
